Informational

Exploring the Dual Rail Power Supply Feature of the SCU6x Controller

In this video, we delve into the dual rail power supply feature of the SCU6x Controller. This feature provides a separate power rail for the driver and the logic, enhancing safety by allowing the power to the driver part to be cut off when necessary, such as during access to a web guide. Demonstrations include how to indicate power status and control the actuator via this dual rail system.

A Common Customer Concern, Controlling the Actuator when the Web Breaks

In this video, we address a common customer concern about actuators in the event of a web break, focusing on the safety features of the SCU6x Controller. We cover how the actuator will not drive to a mechanical limit due to electronic limits, preventing burnout. Additionally, we discuss the advanced digital system of our stepper motor-based actuators, which includes electronic stroke limits, limit switch options using NPN proximity sensors, and the lock on lost edge feature.

In this episode, we explore how to utilize the center guiding feature of the SCU6x Controller with two sensors, focusing on automatic adjustments and setup. We demonstrate the mechanics of center guiding using an actuator and explain the importance of using sensors of the same range. With detailed visuals, we show how to reset the guide point and align the material to the center of the machine.

In this video, we explore the two main reasons for using center guiding in web handling systems, focusing on the advantages it brings when dealing with varying web widths and poor edge quality. The SCU6x Controller's advanced sensor technology allows seamless adjustments without the need to move sensors, accommodating significant width changes efficiently. This ensures high response times and minimizes wear on actuators.

Resetting the Guide Point in Center Guiding with SCU6x Controller

This video explains how to reset the Guide Point in Center Guiding using the SCU6x Controller. It demonstrates the process of center guiding with two sensors and showcases how to reset the guide point and adjust the offset. You'll learn how to manage the actuator direction changes and understand the reasons for allowing a guide point offset even when aiming for center alignment.

This video looks at protecting access to the operator and power user screens through the use of password protection in the SCU6x Controller. It shows how to enable and disable the password, explains the different user levels, and how to change the passwords. The video also covers important information about default passwords and the process to reset them if forgotten. Operator Screen Access Protection.

Roll-2-Roll Technologies would be introducing the WPS 900 sensor, one of the widest sensors that in the market. With over 35 inches of sensor range, this is one of the widest edge sensors, if not the widest in the converting industry. Please come visit us at the booth to find out more.

Roll-2-Roll Technologies offers robust width measurement capabilities with the WPS 440 Sensor. Using a PLC  connected via ethernet, we are able to accurately measure the width of any material.